man2html²þ $Revision: 1.4 $
LOGROTATE(8) System Administrator's Manual LOGROTATE(8)
NAME
logrotate - rotates, compresses, and mails system logs
SYNOPSIS
logrotate [-dv] [-f|--force] [-s|--state statefile] config_file ..
DESCRIPTION
logrotate is designed to ease administration of systems that generate
large numbers of log files. It allows automatic rotation, compression,
removal, and mailing of log files. Each log file may be handled daily,
weekly, monthly, or when it grows too large.
Normally, logrotate is run as a daily cron job. It will not modify a
log more than once in one day unless the criterion for that log is
based on the log's size and logrotate is being run more than once each
day, or unless the -f or --force option is used.
Any number of config files may be given on the command line. Later con-
fig files may override the options given in earlier files, so the order
in which the logrotate config files are listed is important. Normally,
a single config file which includes any other config files which are
needed should be used. See below for more information on how to use
the include directive to accomplish this. If a directory is given on
the command line, every file in that directory is used as a config
file.
If no command line arguments are given, logrotate will print version
and copyright information, along with a short usage summary. If any
errors occur while rotating logs, logrotate will exit with non-zero
status.
OPTIONS
-d Turns on debug mode and implies -v. In debug mode, no changes
will be made to the logs or to the logrotate state file.
-f, --force
Tells logrotate to force the rotation, even if it doesn't think
this is necessary. Sometimes this is useful after adding new
entries to a logrotate config file, or if old log files have
been removed by hand, as the new files will be created, and log-
ging will continue correctly.
-m, --mail <command>
Tells logrotate which command to use when mailing logs. This
command should accept two arguments: 1) the subject of the mes-
sage, and 2) the recipient. The command must then read a message
on standard input and mail it to the recipient. The default mail
command is /usr/bin/mail -s.
-s, --state <statefile>
Tells logrotate to use an alternate state file. This is useful
if logrotate is being run as a different user for various sets
of log files. The default state file is /var/lib/logrotate/sta-
tus.
--usage
Prints a short usage message.
-v, --verbose
Display messages during rotation.
CONFIGURATION FILE
logrotate reads everything about the log files it should be handling
from the series of configuration files specified on the command line.
Each configuration file can set global options (local definitions over-
ride global ones, and later definitions override earlier ones) and
specify logfiles to rotate. A simple configuration file looks like
this:
# sample logrotate configuration file
compress
/var/log/messages {
rotate 5
weekly
postrotate
/usr/bin/killall -HUP syslogd
endscript
}
"/var/log/httpd/access.log" /var/log/httpd/error.log {
rotate 5
mail www@my.org
size 100k
sharedscripts
postrotate
/usr/bin/killall -HUP httpd
endscript
}
/var/log/news/* {
monthly
rotate 2
olddir /var/log/news/old
missingok
postrotate
kill -HUP `cat /var/run/inn.pid`
endscript
nocompress
}
The first few lines set global options; in the example, logs are com-
pressed after they are rotated. Note that comments may appear anywhere
in the config file as long as the first non-whitespace character on the
line is a #.
The next section of the config file defines how to handle the log file
/var/log/messages. The log will go through five weekly rotations before
being removed. After the log file has been rotated (but before the old
version of the log has been compressed), the command /sbin/killall -HUP
syslogd will be executed.
The next section defines the parameters for both
/var/log/httpd/access.log and /var/log/httpd/error.log. Each is
rotated whenever it grows over 100k in size, and the old logs files are
mailed (uncompressed) to www@my.org after going through 5 rotations,
rather than being removed. The sharedscripts means that the postrotate
script will only be run once (after the old logs have been compressed),
not once for each log which is rotated. Note that log file names may
be enclosed in quotes (and that quotes are required if the name con-
tains spaces). Normal shell quoting rules apply, with ', ", and \
characters supported.
The last section defines the parameters for all of the files in
/var/log/news. Each file is rotated on a monthly basis. This is con-
sidered a single rotation directive and if errors occur for more than
one file, the log files are not compressed.
Please use wildcards with caution. If you specify *, logrotate will
rotate all files, including previously rotated ones. A way around this
is to use the olddir directive or a more exact wildcard (such as
*.log).
If the directory /var/log/news does not exist, this will cause logro-
tate to report an error. This error cannot be stopped with the missin-
gok directive.
Here is more information on the directives which may be included in a
logrotate configuration file:
compress
Old versions of log files are compressed with gzip(1) by
default. See also nocompress.
compresscmd
Specifies which command to use to compress log files. The
default is gzip(1). See also compress.
uncompresscmd
Specifies which command to use to uncompress log files. The
default is gunzip(1).
compressext
Specifies which extension to use on compressed logfiles, if com-
pression is enabled. The default follows that of the default
compression command (.gz).
compressoptions
Command line options may be passed to the compression program,
if one is in use. The default, for gzip, is "-9" (maximum com-
pression).
copy Make a copy of the log file, but don't change the original at
all. This option can be used, for instance, to make a snapshot
of the current log file, or when some other utility needs to
truncate or parse the file. When this option is used, the cre-
ate option will have no effect, as the old log file stays in
place.
copytruncate
Truncate the original log file to zero size in place after cre-
ating a copy, instead of moving the old log file and optionally
creating a new one. It can be used when some program cannot be
told to close its logfile and thus might continue writing
(appending) to the previous log file forever. Note that there
is a very small time slice between copying the file and truncat-
ing it, so some logging data might be lost. When this option is
used, the create option will have no effect, as the old log file
stays in place.
create mode owner group
Immediately after rotation (before the postrotate script is run)
the log file is created (with the same name as the log file just
rotated). mode specifies the mode for the log file in octal
(the same as chmod(2)), owner specifies the user name who will
own the log file, and group specifies the group the log file
will belong to. Any of the log file attributes may be omitted,
in which case those attributes for the new file will use the
same values as the original log file for the omitted attributes.
This option can be disabled using the nocreate option.
daily Log files are rotated every day.
dateext
Archive old versions of log files adding a daily extension like
YYYYMMDD instead of simply adding a number.
dateformat
Specify the extension for dateext using the notation similar to
strftime(3) function. Only %Y %m and %d specifiers are allowed.
The default value is -%Y%m%d. Note that also the character sepa-
rating log name from the extension is part of the dateformat
string.
delaycompress
Postpone compression of the previous log file to the next rota-
tion cycle. This only has effect when used in combination with
compress. It can be used when some program cannot be told to
close its logfile and thus might continue writing to the previ-
ous log file for some time.
extension ext
Log files with ext extension can keep it after the rotation. If
compression is used, the compression extension (normally .gz)
appears after ext. For example you have a logfile named
mylog.foo and want to rotate it to mylog.1.foo.gz instead of
mylog.foo.1.gz.
ifempty
Rotate the log file even if it is empty, overriding the
notifempty option (ifempty is the default).
include file_or_directory
Reads the file given as an argument as if it was included inline
where the include directive appears. If a directory is given,
most of the files in that directory are read in alphabetic order
before processing of the including file continues. The only
files which are ignored are files which are not regular files
(such as directories and named pipes) and files whose names end
with one of the taboo extensions, as specified by the tabooext
directive. The include directive may not appear inside a log
file definition.
mail address
When a log is rotated out of existence, it is mailed to address.
If no mail should be generated by a particular log, the nomail
directive may be used.
mailfirst
When using the mail command, mail the just-rotated file, instead
of the about-to-expire file.
maillast
When using the mail command, mail the about-to-expire file,
instead of the just-rotated file (this is the default).
maxage count
Remove rotated logs older than <count> days. The age is only
checked if the logfile is to be rotated. The files are mailed to
the configured address if maillast and mail are configured.
minsize size
Log files are rotated when they grow bigger than size bytes, but
not before the additionally specified time interval (daily,
weekly, monthly, or yearly). The related size option is similar
except that it is mutually exclusive with the time interval
options, and it causes log files to be rotated without regard
for the last rotation time. When minsize is used, both the size
and timestamp of a log file are considered.
missingok
If the log file is missing, go on to the next one without issu-
ing an error message. See also nomissingok.
monthly
Log files are rotated the first time logrotate is run in a month
(this is normally on the first day of the month).
nocompress
Old versions of log files are not compressed. See also compress.
nocopy Do not copy the original log file and leave it in place. (this
overrides the copy option).
nocopytruncate
Do not truncate the original log file in place after creating a
copy (this overrides the copytruncate option).
nocreate
New log files are not created (this overrides the create
option).
nodelaycompress
Do not postpone compression of the previous log file to the next
rotation cycle (this overrides the delaycompress option).
nodateext
Do not archive old versions of log files with date extension
(this overrides the dateext option).
nomail Do not mail old log files to any address.
nomissingok
If a log file does not exist, issue an error. This is the
default.
noolddir
Logs are rotated in the directory they normally reside in (this
overrides the olddir option).
nosharedscripts
Run prerotate and postrotate scripts for every log file which is
rotated (this is the default, and overrides the sharedscripts
option). If the scripts exit with error, the remaining actions
will not be executed for the affected log only.
noshred
Do not use shred when deleting old log files. See also shred.
notifempty
Do not rotate the log if it is empty (this overrides the ifempty
option).
olddir directory
Logs are moved into directory for rotation. The directory must
be on the same physical device as the log file being rotated,
and is assumed to be relative to the directory holding the log
file unless an absolute path name is specified. When this option
is used all old versions of the log end up in directory. This
option may be overridden by the noolddir option.
postrotate/endscript
The lines between postrotate and endscript (both of which must
appear on lines by themselves) are executed after the log file
is rotated. These directives may only appear inside a log file
definition. See also prerotate. See sharedscripts and noshared-
scripts for error handling.
prerotate/endscript
The lines between prerotate and endscript (both of which must
appear on lines by themselves) are executed before the log file
is rotated and only if the log will actually be rotated. These
directives may only appear inside a log file definition. See
also postrotate. See sharedscripts and nosharedscripts for
error handling.
firstaction/endscript
The lines between firstaction and endscript (both of which must
appear on lines by themselves) are executed once before all log
files that match the wildcarded pattern are rotated, before pre-
rotate script is run and only if at least one log will actually
be rotated. These directives may only appear inside of a log
file definition. If the script exits with error, no further pro-
cessing is done. See lastaction as well.
lastaction/endscript
The lines between lastaction and endscript (both of which must
appear on lines by themselves) are executed once after all log
files that match the wildcarded pattern are rotated, after
postrotate script is run and only if at least one log is
rotated. These directives may only appear inside a log file def-
inition. If the script exits with error, just an error message
is shown (as this is the last action). See also firstaction.
rotate count
Log files are rotated count times before being removed or mailed
to the address specified in a mail directive. If count is 0, old
versions are removed rather than rotated.
size size
Log files are rotated when they grow bigger than size bytes. If
size is followed by M, the size if assumed to be in megabytes.
If the G suffix is used, the size is in gigabytes. If the k is
used, the size is in kilobytes. So size 100, size 100k, and size
100M are all valid.
sharedscripts
Normally, prerotate and postrotate scripts are run for each log
which is rotated, meaning that a single script may be run multi-
ple times for log file entries which match multiple files (such
as the /var/log/news/* example). If sharedscript is specified,
the scripts are only run once, no matter how many logs match the
wildcarded pattern. However, if none of the logs in the pattern
require rotating, the scripts will not be run at all. If the
scripts exit with error, the remaining actions will not be exe-
cuted for any logs. This option overrides the nosharedscripts
option and implies create option.
shred Delete log files using shred -u instead of unlink(). This
should ensure that logs are not readable after their scheduled
deletion; this is off by default. See also noshred.
shredcycles count
Asks GNU shred to overwite log files count times before dele-
tion. Without this option, shred's default will be used.
start count
This is the number to use as the base for rotation. For example,
if you specify 0, the logs will be created with a .0 extension
as they are rotated from the original log files. If you specify
9, log files will be created with a .9, skipping 0-8. Files
will still be rotated the number of times specified with the
rotate directive.
tabooext [+] list
The current taboo extension list is changed (see the include
directive for information on the taboo extensions). If a + pre-
cedes the list of extensions, the current taboo extension list
is augmented, otherwise it is replaced. At startup, the taboo
extension list contains .rpmorig, .rpmsave, ,v, .swp, .rpmnew,
~, .cfsaved, .rhn-cfg-tmp-*,
.dpkg-dist, .dpkg-old, .dpkg-new, .disabled.
weekly Log files are rotated if the current weekday is less than the
weekday of the last rotation or if more than a week has passed
since the last rotation. This is normally the same as rotating
logs on the first day of the week, but if logrotate is not being
run every night a log rotation will happen at the first valid
opportunity.
yearly Log files are rotated if the current year is not the same as the
last rotation.
FILES
/var/lib/logrotate.status Default state file.
/etc/logrotate.conf Configuration options.
SEE ALSO
gzip(1)
NOTES
The killall(1) program in Debian is found in the psmisc package.
AUTHORS
Erik Troan <ewt@redhat.com>
Preston Brown <pbrown@redhat.com>
Corrections and changes for Debian by Paul Martin <pm@debian.org>
Red Hat Linux Wed Nov 5 2002 LOGROTATE(8)
[ Ìá¤ë ]